Difficulty level: Beginner
Time required: 1 hour plus drying time
Age range: Adults

Things you will need:
Miniature Glittered Snowman
Acrylic Snow Globe Jar
E6000
Miniature Top Hats
Glitter
“Snow Globe” Snowflakes
EnviroTex Lite Pour On High Gloss Finish
Glycerin
Craft Super Heat Gun with Stand (optional)

Things to do:
1. Sand the inside of the snow globe where the snowman will be placed.
2. Using the E6000 glue, glue the snowman onto the inside piece of the snow globe. Hold the snowman in place for awhile until glue starts to dry. I used a heat gun for a short period of time to speed up the glue drying process, as my snowman kept falling over. Let glue dry for a minimum of 24 hours.

3. Brush the snowman with the EnvironTex Lite. Allow to dry for at least 8 hours or up to 48 hours for full strength.
4. Fill the snow globe with water. Then add the snowman hats and snowglobe snowflakes.

5. Add the extra fine white glitter, as much as desired.Then add a 1/2 tsp. of glitter to the water.

6. Coat the outside edges of the seal of the snow globe with the E6000 glue. Then leave the snow globe upside down to dry for at least 24 hours.

7. Screw on the base of the snow globe.