Skip to search Skip to navigation menu Skip to main content Selecting option will reload page

Modge Podge Wood Bangles

Modge_Podge_Wood_Bangles
You would never guess by looking at these bracelets that they can be made with three craft staples. Simple and fun! Try different glasses for drying your sticks to find one that fits your wrist well and then make them by the dozen. A perfect summer project!

Things you’ll need:
Wide craft sticks (tongue depressors)
Scrapbook paper
Modge Podge
Foam paintbrush
Craft knife
Water
Glasses or mugs
Container longer than the sticks

Things to do:
1. Fill the long container with a dozen or so sticks and cover with water. Allow the sticks to soak for several hours (probably overnight or at least 8 to 10 hours) to soften them. You can also try boiling them in water for about 15 minutes.
Modge_Podge_Wood_Bangles2
2. Remove one stick from the water and gently work it into a circular shape, Slide the stick into a cup to hold it’s shape. Allow the stick to dry in the cup. Repeat with the remaining sticks.
Modge_Podge_Wood_Bangles3
3. Once the sticks are dry and shaped. Cut strips of paper slightly longer and wider than the sticks.
Modge_Podge_Wood_Bangles4
4. Coat the top of one of the bracelets with a thin layer of Modge Podge and then smooth the paper on, rubbing out any bubbles.
5. Using the craft knife, trim away the excess paper.
Modge_Podge_Wood_Bangles5
6. Allow the Modge Podge to dry for a moment and then add a coat over the paper to seal. Smoothing any wrinkles that form.
7. Once the outer coat is dry, coat the inside of the bracelet with two or three coats of Modge Podge to create a smooth surface and allow it to dry before wearing.

Continue Reading

Decorative Thumb Tack Styrofoam Balls

Thumb_Tack_Balls
One of the easiest ways to spruce up the decor in a room is by bringing in small details with interest and impact. Decorative balls placed in a bowl or stacked in a large vase are an excellent choice for this and these thumbtack-covered balls are simple, inexpensive and visually striking. If you can’t find thumbtacks in a color you like, they can easily be painted, either before or after creating the ball.

Things you’ll need:
4-inch styrofoam balls
Flat topped thumbtacks, about 500 per ball
Spray paint (optional)

Things to do:
1. Firmly push the thumbtacks into the ball, overlapping the edges slightly to create a fish scale texture.
Thumb_Tack_Balls2
Thumb_Tack_Balls3
2. Continue to press the pins in until the entire surface of the ball is covered.
Thumb_Tack_Balls4
3. If desired, spray the ball with several light coats of spray paint, allowing each to dry before adding the next.

Continue Reading
Change Your Country
Please select your country, this will change the site to your country's currency:

Cancel