Sometimes you just need a little zing in your day. Something fun and different to make life a little silly and exciting. Like glitter shoes… like red glitter shoes. Sure, you can buy them, but you can also turn some not so pretty shoes you already have into a pair of shoes Dorothy would have danced for with a little Mod Podge.
Things you’ll need:
Shoes
Painter’s tape
Mod Podge Hard Coat
Fine red glitter
Fine silver glitter
Foam brush
Clear coat finish
Things to do:
1. Wipe the surface of your shoes clean and tape off any areas that you don’t want glittered.
2. Mix together the Modge Podge and the glitters, adjusting the quantities of the glitter to your liking.
3. Paint a thin coat of the glitter Modge Podge onto the exposed portions of the shoes. Allow the Modge Podge to dry thoroughly.
4. Repeat this process at least two more times or until the shoes are thoroughly covered.
5. Coat the glitter with a thin layer of clear coat to seal.
3 Comments
The innovative design of this shoe make the shoe become a pair of stylish shoes. Thank you for show this great design.
I know in the inductions it says to use a clear cost finish, but what exactly can be used for a clear coat?
Great question Janice! Any polyurethane clear sealer should work. I would recommend testing a small section of your project to check its compatibility before covering the entire project. We carry a great sealer that would be perfect for shoes that you can find here factorydirectcraft.com/catalog/products/1302_2105_1060-5230-folkart_glossy_outdoor_sealer.html Please let us know if you have any other questions or concerns, as we are more than happy to help you! Happy crafting!