Create your own Haunted Woods

Shadows of a thousand years rise again unseen,
Voices whisper in the trees, “Tonight is Halloween!” – – – Dexter Kozen
haunted_woods_blog
Create your own haunted woods. This would be an easy craft project for any child to make for the Halloween festivities. Be sure to supervise your child as the pieces in this project are tiny. Happy Haunting!

Materials Needed:
Weldbond Universal Glue
Black Wooden Silhouette Tree
“Haunted Woods” Halloween Buttons
Mixed Glass Tube Beads
3mm Googly Eyes
Tweezers
Small Cotton Ball

Instructions:
1. Take your Weldbond Universal glue and glue the button bushes from your “Haunted Woods” Halloween buttons mix on the back of the black wooden silhouette tree and let dry.
2. Again take your Weldbond Universal glue and glue the remaining “Haunted Woods” Halloween buttons on the black wooden silhouette tree anyway you would like and then let dry.
**Tip: Let the button hole of your “Haunted Woods” Halloween buttons rest against the side of the black wooden silhouette tree. Also, you can try holding each button for about 20 seconds after gluing.
3. Next, take your Weldbond Universal glue and drop a large drop of glue on the ends of the branches and then sprinkle your mixed glass tube beads onto the glue drops.
4. Place two small drops of Weldbond Universal glue onto the owl of the black wooden silhouette tree and use your tweezers to place the two 3mm googly eyes onto the owl.
5. Finally, take a small piece of your cotton ball and stretch it very thin. Take your Weldbond Universal glue and put a little glue on your finger. Rub the glue on the bottom of the black wooden silhouette tree. Then take the stretched out piece on cotton and place on the glue. And you have now completed your hauntingly scary wood silhouette!

You could also add some Halloween glitter for an even more haunting effect!

You may also like

2 Comments

  1. Does this Haunted Woods craft materials come in a kit with instructions? I’d like to make it.
    Thanks!
    Millie

    1. Millie, Im glad you like our project! Unfortunately this does not come in a kit, but if you look under the “things you need” section of this project, you can click on each item and it will bring you to our website with that specific item, just simply add to your cart (do this to each item under that section)! The instructions are on this blog post, you can just print this page from your computer, or if it would be easier we could send you an email and you can print that out. Just let me know which is easiest for you! If you have any problems or questions please dont hesitate to ask!