|
||||||||||||||||||||||||||||||||||
That broken heirloom lamp has been sitting in the attic for too long! And no, don't get rid of it-rejuvenate it! Thanks to this Nostalgia Lamp Kit, you can be further inspired to make something a part of your home decor that you never thought you would, otherwise!
So, go fetch for that lamp, and with the use of its base, lampshade, and a standard bulb, it's time to get started! Instructions: Secure the provided pipe to your base by placing one nut above and one nut below, and attach the remaining brass nut onto the top end of the pipe. Slide the provided plastic cord protector to the bottom of the pipe. Insert the provided cord through the base's opening and pipe. Slide the provided lamp shade support bracket over the pipe, onto the earlier attached top nut. Then, screw the brass socket base onto the top of the pipe. Adjust and tighten this top nut. Next, connect the cord's wires to the socket. Place the brass socket cover over the socket and into the socket base. Put the provided shade bracket prongs into the shade support, and slide the prong end covers over the bracket support. Slide and install one silver washer onto the shade screw. Slide the second silver washer over the screw, on top of the shade. Screw the shade nut tightly onto the shade. Lastly, attach rubber feet to your base, if you'd like! And, voila! This is designed for nine to eleven-inch containers. This kit makes one lamp.
|
||||||||||||||||||||||||||||||||||
|
Change Your Country
Please Correct The Following